Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Midtown
If your fireplace is smoking into the room, your damper won’t close, or your pilot light keeps going out, call (855) 724-0919. We repair gas and wood-burning fireplaces, inserts, dampers and fireboxes in Midtown’s pre-war co-ops and condos, and we start with a camera inspection so you know exactly what’s wrong before anyone recommends work. Midtown fireplaces live in old buildings with unusual flue layouts. A repair that ignores how the flue runs behind the plaster, or how it’s shared with the apartment next door, tends to fail. We plan around the building, not just the firebox. Our technicians have up to 11 years of experience, and we answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Midtown Homeowners Call Chimney Sweep Bedford-Stuyvesant for Fireplace Repair
Most of our fireplace work in Midtown happens in buildings from the 1920s through the 1940s, where the flue was never designed for the way people use fireplaces now. We work with co-op boards and building managers who need the job done quietly, on schedule, and documented. That means a written report and photos you can hand to a board or an insurer, not a verbal “it’s all fine.”
Our technicians have up to 11 years of experience with masonry fireplaces, gas inserts and the original clay tile liners common in Midtown high-rises. We keep that experience focused: fireplace repair, chimney repair, cap and crown work, sweeps and standalone inspections. When we find a problem outside the fireplace, you’re already talking to the people who handle it. That’s the point of working with one specialist for the whole system.
Getting to Midtown is straightforward. We schedule around building access rules, service elevators and the window a board or super gives us, and we keep the work discreet inside occupied apartments. Call (855) 724-0919 and we’ll book an inspection or a repair visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Midtown
Wood Burning Fireplace Repair
Wood-burning fireplaces in Midtown pre-war apartments usually develop two problems together: a firebox that’s cracked or missing mortar joints, and a damper that no longer seals. Both show up as smoke spillage and a weak draft. We camera the flue, repoint the firebox where it’s sound enough to save, reset or replace the damper, and tell you plainly whether the liner can wait. In many buildings the flue is original and unlined, and a HeatShield ceramic liner is the repair that lets the fireplace be used safely again without tearing the chimney apart.
Gas Fireplace Repair
Gas fireplaces and gas logs in Midtown condos and converted apartments need correct venting as much as a working burner. A pilot assembly that keeps dropping out, a burner with lazy orange flame, or soot on the logs usually points to a venting or combustion air problem, not just a worn thermocouple. We test the appliance and check how it vents before we replace parts. Carbon monoxide is the real risk in a sealed high-rise unit, so we treat any gas fireplace fault as a venting question first.
Fireplace Insert Service
Inserts are common in Midtown because they fit an existing masonry opening. The trouble is that an insert installed decades ago often has a liner sized for a different appliance, or no proper liner connection at all. We pull the surround, inspect the connection and the flue, and repair or correct the venting. If the insert itself is past saving, we’ll say so and explain the options rather than patch it.
Damper Repair
A damper that won’t close lets heated air and conditioned air straight up the flue all winter, and one that won’t open fully causes smoke in the room. In Midtown’s older fireplaces the damper frame is often rusted into the masonry. We free it, repair the pivot, or replace the damper assembly with a professional-grade component sized to the opening.
Trusted Brands We Service in Midtown
We supply and install only professional-grade chimney components, sourced from brands like DuraFlex, Copperfield and HeatShield. That matters in Midtown, where a repair has to satisfy a co-op board and hold up for decades in a building that isn’t going anywhere. We don’t stock parts on a truck or keep a Midtown warehouse. Parts are ordered for your job and fitted to your flue, which keeps the turnaround honest and the material right. If you’ve had a generic hardware-store damper or cap installed before, we can tell you whether it’s the source of the problem.
Common Fireplace Repair Problems We See in Midtown Homes
Midtown’s pre-war buildings fail in ways that a suburban house rarely does. The usual culprits:

- Original unlined flues. Many pre-war flues were built without a liner, so creosote builds on bare masonry that spalls and cracks over time. A co-op sale often can’t close until the flue is relined, which we handle with HeatShield or a DuraFlex liner depending on the flue’s condition.
- Shared flues between apartments. When two units feed the same flue, a repair in one apartment changes the draft in the other. Smoke odor complaints that “come and go” are usually a cross-unit draft problem, and they’re nearly impossible to diagnose without a camera inspection.
- Gas inserts with wrong-sized venting. A gas insert or conversion installed without matching the vent to the appliance can run with incomplete combustion in a tightly sealed unit. That’s a carbon monoxide concern, not a cosmetic one, and it’s worth checking before the heating season starts.
- Third-degree creosote in the smoke chamber. Glazed, tar-like creosote is hard to remove with a brush and is the fuel for a chimney fire. It shows up in Midtown fireplaces that burn heavily through cold winters, especially where the flue was never lined.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in Midtown, NY
Fireplace repair in Midtown is priced per job from a written estimate, and the estimate is free. Typical ranges in this market:
| Service | Typical Midtown range |
|---|---|
| Damper repair or replacement | $250-$650 |
| Firebox repointing and repair | $400-$1,200 |
| Gas fireplace or pilot light repair | $180-$450 |
| Insert inspection and venting correction | $300-$900 |
| HeatShield liner restoration | $1,800-$4,500 |
What moves the price is access, flue condition, and whether the liner needs work. Co-op access rules and shared flues can add time. The written estimate sets the final price, and if a camera inspection shows the fireplace can safely wait, we’ll tell you that too.
We Also Serve Cities Near Midtown
We work throughout Midtown and the neighborhoods around it, including Kips Bay, Gramercy, the Lower East Side and Fort Greene. If your building is on the edge of Midtown or just across it, call and we’ll confirm coverage. Our fireplace repair team handles the whole system, so a repair found during an inspection doesn’t mean hiring a second contractor.
Serving Midtown, NY – Our Local Coverage Area
We serve Midtown and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Midtown
You almost certainly need a Level 2 inspection, which includes a camera view of the flue and a documented report. Most Midtown pre-war buildings require it because the flue is often shared and the liner may be original, so the board needs evidence the flue is sound before a sale closes. We provide the report and photos you can submit directly. Call (855) 724-0919 to book it.
Yes, but the shared flue changes the job. A repair in your unit can affect draft and safety in the neighboring apartment, so we inspect the flue with a camera first, confirm how the units connect, and only then recommend the repair. We don’t touch a shared flue on guesswork. Call (855) 724-0919 for an inspection.
Smoke with the damper open usually means the flue is blocked, undersized, or losing draft to a neighboring unit on the same flue. In pre-war buildings, heat cycling on original clay tile can also crack the liner and open gaps that kill draft. A camera inspection identifies which one it is. Call (855) 724-0919 for an exact quote.
Third-degree creosote is the glazed, tar-like stage that hardens on the flue and can’t be brushed off. It’s a concern here because Midtown fireplaces get heavy seasonal use through cold winters, and an unlined pre-war flue gives it plenty to cling to. It’s the fuel for a chimney fire, so it needs professional removal before the next burning season. Call (855) 724-0919 to schedule.
Yes. We work in Midtown high-rises Sunday through Friday, 7am to 7pm, and we coordinate with building access rules and service elevators. We’re closed Saturdays. Call (855) 724-0919. We answer 24/7 and book same-day visits where the schedule allows.
Book a Fireplace Repair in Midtown
Smoke in the room, a damper that won’t seal, a pilot light that won’t stay lit, or a co-op board asking for an inspection before a sale: those all start the same way, with a camera inspection and a written report you can see for yourself. Call (855) 724-0919 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bedford-Stuyvesant.