Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Bedford-Stuyvesant Homeowners
Brownstone chimneys take a beating. The same soft brick and lime mortar that give Bedford-Stuyvesant blocks their character also soak up water, and once a crown cracks or a flashing seam opens, the freeze-and-thaw cycle starts pulling the chimney apart from the inside out. We handle the whole repair: mortar repointing, spalling brick, waterproofing, flashing, rebuilding, and tuckpointing, using professional-grade components from HeatShield, Gelco, Olympia Chimney, and Famco. Our technicians have up to 11 years of experience, and every job starts with a documented inspection so you know what’s actually wrong before anything gets sold. Same-day repair is often possible in Bedford-Stuyvesant when you call early. Reach us at (855) 724-0919. We answer 24/7.

What Our Chimney Repair Service Includes
Chimney repair isn’t one trade. It’s six or seven small trades stacked on top of each other, and each one fails in its own way. Here’s what each repair actually involves and when it makes sense to call.
Mortar Repointing
Repointing is replacing the crumbling mortar joints between bricks without removing the bricks themselves. You need it when joints have receded, turned sandy, or started falling out in flakes, which lets water straight into the chimney’s core. We grind out the failed mortar to a proper depth and repack it with a mortar matched to the original brick, not a hard modern mix that will crack the softer historic units around it.
Spalling Brick Repair
Spalling is when the face of a brick pops off, usually after trapped moisture freezes and expands behind it. It’s common on Bedford-Stuyvesant chimneys above the roofline where the masonry is exposed on all sides. We remove the damaged units, replace them with brick of matching size and color where we can, and treat the surrounding masonry so the same freeze pattern doesn’t take the next course down.
Chimney Waterproofing
Waterproofing is a breathable vapor-permeable treatment applied to the exterior masonry so rain runs off without sealing moisture inside. You want it after a repoint or rebuild, or any time the brick looks damp, dark, or has white efflorescence blooming on it. We apply it only to sound masonry, because sealing over failing brick traps the water you’re trying to keep out.
Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the most common source of the leaks homeowners blame on the chimney top. You need it checked when you see staining on ceilings near the chimney, rust streaks on the masonry, or daylight where the metal should meet the shingles. We reseat and reseal flashing at the roof-to-chimney joint, replacing failed sections where the metal has corroded through.
Chimney Rebuilding
Rebuilding means taking the chimney down to a sound course and rebuilding the stack above the roofline. It’s the right call when the crown and upper courses are structurally compromised, not just cosmetically worn. We rebuild with new brick and proper mortar, set a new crown, and cap the finished stack so the whole top of the system is sound in one pass.
Tuckpointing
Tuckpointing is a finer version of repointing, where a finished joint is struck to a clean profile for a sharper, more uniform look on visible masonry. It’s usually chosen on front-facing chimneys where appearance matters as much as weather-tightness. We match the joint profile and mortar color to the surrounding work so the repair reads as part of the original wall.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Repair
We supply and install professional-grade chimney components, which means the parts going into your repair are the same tier of material certified specialists use nationwide. HeatShield is our go-to for liner restoration: the ceramic resurfacing system that rebuilds a deteriorating flue from the inside without a full reline, and it’s a technically specific solution most sweep-only companies simply don’t offer. Gelco covers our cap and crown components, where the right material and fit decide whether water gets in at the top of the stack.
Olympia Chimney and Famco round out the lineup for liners, caps, and the structural pieces that hold a repair together over the long run. We know where each of these systems wears and what a failing joint looks like before it turns into a rebuild. Whether you have HeatShield, Gelco, Olympia Chimney, Famco, or any other make, we can help.
Signs You Need Chimney Repair Right Now
- Crumbling or missing mortar joints. If the joints between bricks look recessed, sandy, or you can rake mortar out with a fingernail, water is already getting in. Repointing early costs far less than rebuilding the stack later.
- Brick faces flaking or popping off. Spalling means moisture has been freezing inside the masonry. Each spalled brick exposes fresh surface to the next freeze, so the damage accelerates with every winter.
- Water stains on the ceiling or chimney breast. Staining near the chimney usually points to flashing or crown failure, not the roof itself. A camera inspection tells you which before anyone quotes a repair.
- A cracked or crumbling crown. The crown is the concrete cap at the very top, and a hairline crack there channels water straight down into the flue. Small crown cracks are a repair; a failed crown is a rebuild.
- White powder or dark damp patches on the masonry. Efflorescence and dark streaks mean the brick is holding moisture. Left alone, that moisture works its way to the liner and the interior framing.
Our Chimney Repair Process – Step by Step
- 1
Inspection first, always. We start with a documented inspection of the full system, from firebox to crown, using a camera to see inside the flue. You get the findings before any repair is recommended, and you see the photos yourself.
- 2
A written scope and a flat price. We lay out exactly what’s wrong, what we’d repair, and what can safely wait. The price is set per job by the written estimate, so there are no surprises once work starts.
- 3
Masonry and liner work. Depending on the findings, that’s repointing, brick replacement, flashing, crown work, or HeatShield liner restoration. We use professional-grade materials matched to the existing masonry.
- 4
Waterproofing and cap. Once the structural repairs are sound, we seal the exterior with a breathable waterproofing treatment and make sure the cap and crown are shedding water where they should.
- 5
Final check and photo report. We re-inspect the completed work, photograph it, and leave you with a record of what was done. If something needs watching, we tell you and when to check back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Bedford-Stuyvesant?
Chimney repair in Bedford-Stuyvesant typically runs from a few hundred dollars for minor mortar work up to several thousand for a full rebuild above the roofline, and the written estimate sets the final price. What drives the range is the scope: how much masonry is failing, whether the crown or flashing is involved, and whether the liner needs restoration on top of the brick work.

| Repair | Typical estimated range | What affects it |
|---|---|---|
| Mortar repointing / tuckpointing | Lower end of the range | Linear feet of joint, access, mortar matching |
| Spalling brick replacement | Mid range | Number of units, matching brick availability |
| Flashing repair | Mid range | Roof pitch, extent of corrosion, resealing |
| Chimney waterproofing | Lower to mid range | Exterior surface area, prep work needed |
| Crown repair or rebuild | Mid to upper range | Crown size, whether a rebuild is needed |
| Full chimney rebuilding | Upper end | Height above roofline, structural extent |
How to avoid overpaying: get the inspection first, ask to see the camera photos, and don’t accept a repair recommendation you can’t verify. Anything that isn’t urgent, we’ll tell you plainly so you can plan it rather than rush it. Our free estimate lays out the line items so you can compare like for like, and the price is set per job by the written estimate.
Chimney Repair Near Bedford-Stuyvesant – Our Service Area
We cover chimney repair across Bedford-Stuyvesant and the surrounding blocks, including Prospect Heights, Clinton Hill, Carroll Gardens, Williamsburg, and Bushwick, with wider coverage reaching the Lower East Side and Manhattan. Response is quick across the neighborhood, and if your repair is part of a larger chimney repair project or a separate cap and crown job, we handle it under one visit where the scope allows.
Serving Bedford-Stuyvesant, NY – Our Local Coverage Area
We serve Bedford-Stuyvesant and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Repair in Bedford-Stuyvesant
Chimney repair is the masonry and structural work that keeps a chimney watertight and sound, covering repointing, brick replacement, waterproofing, flashing, crown work, and rebuilding. It’s separate from cleaning and inspection, which tell you what needs fixing. We handle the full system in one place, so you’re not hiring a mason for the brick and someone else for the cap. Call (855) 724-0919 for a free estimate.
Most mortar and flashing repairs finish in a day, while a full rebuild above the roofline can take several days depending on height and weather. The written estimate spells out the expected timeline for your specific job. We schedule around drying and curing needs so the work lasts. Call (855) 724-0919 for a timeline on your chimney.
It depends on scope, from a few hundred dollars for minor repointing to several thousand for a rebuild, and the written estimate sets the final price. The biggest cost driver is how much masonry has failed and whether the crown or liner is involved. We give you a flat price per job after inspection, not a guess. Call (855) 724-0919 for an exact quote – estimates are free.
Yes. We install and service HeatShield ceramic liner restoration, which rebuilds a deteriorating flue from the inside without a full reline. It’s a technically specific solution most sweep-only companies don’t offer, and we know where it wears. Call (855) 724-0919 to find out whether restoration suits your flue.
Same-day repair is often possible when you call early. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 724-0919.
Yes, we stand behind the repairs we complete, and your written estimate documents the scope. We use professional-grade components from suppliers like HeatShield, Gelco, and Olympia Chimney so the materials hold up, not just the labor. If something we repaired isn’t right, we want to hear about it. Call (855) 724-0919 with any warranty question.
Clear access to the fireplace and the chimney, move anything fragile nearby, and note any leaks or staining you’ve seen so we can check those spots. You don’t need to do anything technical. The inspection comes first, and you see the findings before work begins. Call (855) 724-0919 to book.
Schedule Your Chimney Repair Service in Bedford-Stuyvesant Today
If your chimney is showing cracks, spalling brick, or water where it shouldn’t be, get it looked at before the next freeze makes it worse. Call (855) 724-0919 for a no-obligation free estimate and a documented inspection first. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One company, every part of your chimney system. Built to last, not patched to pass.
Written by the team at Chimney Sweep Bedford-Stuyvesant.