Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Clinton Hill
If you own a brownstone or rowhouse in Clinton Hill, your chimney was built for a different century. Most of the stacks here were sized to vent coal parlor grates, and a lot of them are still doing that job on paper while a furnace or water heater vents into them in practice. We work on Clinton Hill chimneys of exactly this kind, and we start every visit with a camera in the flue rather than a sales pitch at the door. Call (855) 724-0919 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Clinton Hill Homeowners Call Chimney Sweep Bedford-Stuyvesant for Chimney Repair
Clinton Hill is a preservation neighborhood, whether or not your block sits inside a historic district. The buildings are 1860s to 1900s brownstones and Italianate rowhouses, often three or four stories, with several original fireplace flues per building. Fixing a chimney here means matching mortar to old brick and understanding what a parapet goes through in a New York winter, not swapping parts on a suburban flue. Our technicians have up to 11 years of experience, and we bring that experience to the specific problems these buildings produce.
We serve Clinton Hill as one of our core Brooklyn neighborhoods, so we know the housing stock and we know how these stacks fail. A crown that crumbled on a DeKalb Avenue rowhouse fails for the same reason a crown on a Vanderbilt Avenue brownstone does: freeze-thaw moisture working into exposed parapet masonry. We don’t sell work to homeowners who can’t see the reason for it. You’ll see the flue interior on camera, and you’ll see the crown condition, before we recommend a dollar of repair.
Our approach is full-system. We handle inspection, cleaning, caps and crowns, chimney repair, and fireplace repair with the same company, so a problem found during a sweep doesn’t leave you hunting for a second contractor. That matters on a Clinton Hill brownstone where the flue, crown, and flashing are all aging on the same schedule.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Clinton Hill
Mortar Repointing
Repointing is the work most Clinton Hill chimneys actually need first. Old mortar joints above the roofline weather out faster than the brick, and once they recede, water sits in the joint and the brick face starts to go with it. We rake out the failed mortar and repack the joints with a mix suited to the brick, because a hard modern mortar against soft historic brick drives spalling rather than stopping it.
Spalling Brick Repair
Spalling is the brick face flaking or popping off, and it’s common on Clinton Hill rowhouse stacks that have taken decades of moisture. We replace the blown bricks and treat the cause, which is almost always water getting in above. Replacing brick without addressing the crown or flashing just resets the clock on the same failure.
Chimney Waterproofing
New York’s humid summers and freeze-thaw winters push moisture into aging brick and mortar, and Clinton Hill’s exposed rowhouse parapets catch the worst of it. A breathable waterproofing treatment on the masonry slows that absorption without trapping vapor inside the stack. We waterproof after repairs, not instead of them, so we’re sealing sound masonry rather than locking in a problem.
Flashing Repair
Flashing is the metal at the roof-to-chimney joint, and when it pulls loose or corrodes, water runs straight down the stack into the attic and the rooms below. On the closely built blocks here, wind-driven rain finds every gap. We repair or replace failed flashing and tie it back into the roof correctly. If you want the full picture of what we cover, our chimney repair service page lays it out.
Trusted Brands We Service in Clinton Hill
We supply and install only professional-grade chimney components from brands like DuraFlex, Copperfield, and Olympia Chimney, along with HeatShield for liner restoration. These are the materials certified chimney specialists use nationwide, not the hardware-store substitutes that fail early on an old brownstone flue. We don’t claim to stock parts locally, but we source what your chimney needs and keep turnaround reasonable. When a flue needs relining, the liner we specify is matched to the appliance venting into it, not to whatever is on a shelf.

See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Clinton Hill Homes
- Unlined or parged flues venting modern appliances. Clinton Hill rowhouse chimneys were built for coal parlor grates, so when a furnace or water heater is later tied into an original stack, it’s undersized and unlined for the job. The mismatch is invisible from the hearth and only shows up on camera inside the flue.
- Deteriorated crown mortar and failed flashing on exposed parapets. Freeze-thaw moisture gets into the brick and accelerates spalling on the crown and stack. Once water is tracking down an already-spalling chimney, the repair gets bigger the longer it waits.
- Renovation-era caps, stuck dampers, and disconnected liners. Many parlor-floor fireplaces in Clinton Hill were sealed or converted during 1970s and 1980s renovations. What’s left behind is a flue blocked by fallen mortar, an abandoned damper, or a liner that no longer connects to anything.
- Cracked clay tile liners. Older stacks with clay tile liners develop cracks and gaps at the joints over time. A cracked liner can let heat and gases reach combustible framing, which is why we check the full run of the flue, not just the top.
Pricing for Chimney Repair in Clinton Hill, NY
Repair pricing in Clinton Hill reflects the age and type of the housing, and the kind of masonry work a brownstone stack needs is not a flat-rate job. A typical mortar repointing job in Clinton Hill runs $600 – $1,800, depending on how much of the stack is above the roofline and how many joints have failed. Spalling brick repair typically runs $500 – $1,500. Chimney waterproofing generally runs $300 – $700. A new crown or crown rebuild runs $800 – $2,000, and a full rebuild of a damaged upper stack can run several thousand dollars when the structure has to come down and go back up.
What moves the number is the condition the camera shows, not a package we’re trying to sell. Our estimates are free, the price is set per job by the written estimate, and you’ll get it after we’ve actually looked at the flue, the crown, and the flashing. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait.
We Also Serve Cities Near Clinton Hill
Our Clinton Hill work sits inside a wider Brooklyn footprint, and we serve homeowners in the neighborhoods around it: Fort Greene, Prospect Heights, Williamsburg, and Crown Heights. The housing stock is closely related across these blocks, which means the same historic-masonry and old-flue problems come up on either side of the line.
Serving Clinton Hill, NY – Our Local Coverage Area
We serve Clinton Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Clinton Hill
It still matters because the flue is part of the building’s venting and structure, and a blocked one can back up gases or hide a hazard. On many Clinton Hill brownstones where a parlor fireplace was sealed in a past renovation, the flue is left blocked by fallen mortar, a stuck damper, or a disconnected liner. Even if you never light a fire there, a chimney inspection tells you whether the stack is sound and whether anything vents into it. Call (855) 724-0919 for an exact quote; estimates are free.
Often yes, because the original stack wasn’t sized or lined for that appliance. Clinton Hill rowhouse chimneys were built to vent coal parlor grates, so when a furnace or water heater is later tied in, the mismatch only shows up on camera inside the flue. A liner sized to the appliance is the fix when the footage confirms it’s needed. We’ll show you the evidence before recommending anything. Call (855) 724-0919 for a free estimate.
Moisture, in almost every case. NYC’s humid summers and freeze-thaw winters drive water into aging brick and mortar, and Clinton Hill’s exposed rowhouse parapets take that hit faster than a protected chimney would. When crown mortar and flashing fail, water gets in and freezes, and the brick face starts to break away. Repointing, a rebuilt crown, and waterproofing address the cause. Call (855) 724-0919; estimates are free.
It becomes a repair when the camera shows a blocked or damaged flue that cleaning can’t safely fix. On many Clinton Hill brownstones, a routine sweep turns up a flue blocked by old mortar, a stuck damper, or a disconnected liner, and cleaning isn’t useful until the flue is restored. You know the work is needed because you see the footage yourself. Nothing is recommended without camera evidence you can watch. Call (855) 724-0919 for an exact quote.
Once a year is the standard, even for a chimney you no longer use. A sealed fireplace still has a flue that can block, crack, or hide a liner problem, and a gas or oil appliance venting into an old Clinton Hill stack needs its vent checked regularly. An annual inspection catches deteriorating crown mortar and failed flashing before they turn into a rebuild. Call (855) 724-0919. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
If your Clinton Hill brownstone’s chimney has been quietly aging for decades, the smartest first step isn’t a sales call, it’s a look inside the flue. We run a real inspection, show you what the camera found, and quote repair against that evidence: repointing, spalling brick repair, waterproofing, flashing, or a full rebuild when the stack calls for it. Call (855) 724-0919 for a free estimate. One company, every part of your chimney system, built to last rather than patched to pass.
Written by the team at Chimney Sweep Bedford-Stuyvesant.