Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Midtown
If water is finding its way into a Midtown apartment through a chimney, the fault is usually at the top: a cracked crown or a cap that never fit. We supply and install caps and crowns built for the buildings that line this part of Manhattan, and we start every job by looking at the flue before we sell anything. Chimney cap and crown work in Midtown is a specific trade, because the stacks here are shared, original, and often hidden behind plaster. Our technicians have up to 11 years of experience with exactly this kind of masonry. Call (855) 724-0919 for a free estimate.

Why Midtown Homeowners Call Chimney Sweep Bedford-Stuyvesant for Chimney Cap & Crown
Word travels through co-op boards and building managers faster than any ad. We’ve built a steady reputation in Midtown by showing up when a board inspection flags a crown, documenting the flue configuration with photos, and recommending only what the evidence supports. Property managers who deal with shared multi-flue stacks appreciate that we treat a repair as a structural decision, not an upsell.
Midtown customers also tell us the part they value most is the written estimate agreed before booking, so a board knows the number before work begins. We answer 24/7, and fast dispatch runs from 7am to 7pm. When a Midtown building needs a cap or crown looked at, we know the territory: the pre-war high-rises of the 10017, 10018 and 10022 ZIPs, the converted townhouses near the edges of the district, and the specific demands of a board that has to sign off. We connect you with a licensed local professional who works to those standards, and the inspection stands on its own, so you get a real assessment before any repair is on the table. Serving Midtown is a routine part of our week, and the buildings here have their own rules.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Midtown
A cap and a crown protect the same flue from two different directions. The crown is the masonry or coating at the very top that sheds water away from the stack. The cap sits above the flue opening and keeps rain, birds and debris out. In Midtown’s pre-war buildings both are often original, and both have usually failed in ways that show up as water stains ceilings below. Our chimney cap & crown team handles the full range, from a single replacement to a custom cap sized to a shared stack.
Cap Installation in Midtown
A correctly fitted cap is the single cheapest defense against water and animals entering a flue. In Midtown’s older apartments, we size the cap to the actual flue tile rather than forcing a stock unit onto it. That fit is what keeps rain from running down into shared flues during a heavy storm.
Cap Replacement in Midtown
Many Midtown stacks carry a generic single-flue cap that was never made for the opening it’s sitting on, leaving gaps at the edges. When we replace a cap, we measure the tile and the stack, then supply a professional-grade unit from a maker like Copperfield that actually seals the top. The old cap comes off clean so the masonry beneath isn’t damaged.
Crown Repair in Midtown
A crown that has cracked or lost its overhang lets water pool at the top of the flue, which is where spalling starts. Crown repair in Midtown often means rebuilding the damaged section so it drains away from the stack again. We rebuild with materials compatible with the original masonry, because rigid patching over unlined clay tile tends to fail within a few winters of thermal movement.
Crown Coating in Midtown
Crown coating is the flexible alternative when the crown is sound but porous. A membrane coating from a maker like Gelco seals the surface while allowing the masonry beneath it to move with the seasons. For an unlined Midtown chimney, that flexibility is the point: a coating that flexes survives what rigid mortar doesn’t.
Why Midtown’s Pre-War Crowns Fail Differently
Here’s something specific to these buildings. During mid-century facade repairs across Midtown’s pre-war co-ops, many chimney crowns were repointed with Portland-heavy mortar, a harder mix than the lime mortar originally used. That harder mortar now spalls in its own way, and because it sets stiff, it often traps water against unlined clay tile flues instead of letting the masonry breathe and shed. The result is a crown that looks intact from the roof but is quietly holding moisture against the tile below. Reading that failure correctly is the difference between a proper repair and another patch that cracks next winter.
Trusted Brands We Service in Midtown
We supply and install only professional-grade chimney components from brands like Copperfield, Gelco, DuraFlex and Olympia Chimney, the same tier of materials certified chimney specialists use nationwide rather than hardware-store substitutes. We don’t claim to stock parts on a truck or hold local inventory; what we do is specify the right part for your stack and get it to the job without a long wait. For a Midtown building manager, that means a custom cap or a crown membrane sourced to fit the flue you actually have, not the closest thing on a shelf. One specialist covers the whole system, so a cap job and a crown job aren’t split between two contractors.

Common Chimney Cap & Crown Problems We See in Midtown Homes
- Clay tile flues cracking at the crown terminus. Original clay tile in Midtown pre-war buildings often cracks right where it meets the crown. That crack lets water migrate down behind the plaster walls of the apartment below, showing up as a stain far from the roof.
- Generic single-flue caps on multi-flue stacks. A stack shared by several apartments needs a cap fitted to the whole arrangement, not one unit per flue with gaps between. Those gaps admit rain and let birds and squirrels into shared flues.
- Rigid mortar patches that fail inside a few winters. Unlined masonry chimneys move with temperature changes, and a stiff patch can’t follow that movement. It cracks, water gets back in, and the cycle repeats.
- Hardened mid-century repointing holding water. Crowns repointed with Portland-heavy mortar during old facade work trap moisture against the tile. The surface looks fine; the masonry underneath is saturated.
See the difference
Before
After
Before
After
Before
AfterHow a Typical Midtown Cap & Crown Job Goes
A typical Chimney Cap & Crown job in a Midtown pre-war co-op starts when a board-required inspection reveals a cracked crown or a missing cap on a multi-flue stack shared by several apartments. The usual cause is decades of freeze-thaw cycling on a masonry crown that was never coated, made worse by a generic cap that never fit the original flue tile, so water runs in and the mortar spalls. A qualified local pro documents the flue configuration, recommends a custom multi-flue cap sized to the original tile, and rebuilds or coats the crown with a flexible membrane compatible with the building’s masonry. Nothing gets recommended without camera evidence the board can see. Where work can safely wait, we say so plainly.
Pricing for Chimney Cap & Crown in Midtown, NY
Pricing in Midtown reflects the buildings: tall stacks, shared flues and the access work that goes with them. A single-flue cap installation in Midtown typically runs $275 to $550, while a custom multi-flue cap sized to an original stack usually runs $700 to $1,800 depending on the number of flues and the shape of the opening. Crown repair on a pre-war chimney generally falls between $650 and $2,200, and a flexible crown coating typically runs $450 to $950. What moves the number is the flue count, roof access, and how much of the original crown has to come out. The written estimate sets the final price, and the estimate itself is free. Call (855) 724-0919 to book one.
We Also Serve Cities Near Midtown
The same pre-war building stock and shared-flue problems run past the district lines, so we also work in Kips Bay, Gramercy, the Lower East Side and Fort Greene. If your building sits just outside Midtown, the approach is identical: document the flue, fit the cap, treat the crown. Call (855) 724-0919 and we’ll confirm the details for your address.
Serving Midtown, NY – Our Local Coverage Area
We serve Midtown and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Midtown
Boards require it because a shared flue is a building-wide asset, and a failing crown or cap on one apartment’s flue can push water into the masonry serving several. A proper inspection does cover the crown and cap along with the flue itself. We provide a documented, standalone inspection you can hand to a board, an insurer or a buyer. Call (855) 724-0919 for an exact quote on an inspection.
Yes, when the cap is custom-sized to the original tile rather than forced onto it. We measure the stack and the flue arrangement first, then supply a cap built to fit, so the masonry around the opening isn’t cut or chipped to make a stock unit work. Call (855) 724-0919 to book a look at your stack.
Repair rebuilds a crown that is physically broken or has lost its slope; coating seals a crown that is sound but porous. On an unlined Midtown chimney, coating works because a flexible membrane moves with the masonry instead of cracking against it. A camera look and a hands-on check decide which one your crown needs. Call (855) 724-0919 and we’ll tell you which applies.
A shared multi-flue stack in a pre-war building should get a Level 2 inspection roughly once a year, and always before a sale or after any roof work. Heavy seasonal fireplace use plus freeze-thaw winters here means a crown can go from sound to saturated in a single season. Call (855) 724-0919 to schedule one.
Yes. A gas insert or conversion changes the appliance, not the stack, and the masonry crown and cap still face the same rain and frost. An uncoated crown or a loose cap lets water into the flue regardless of what burns below it. Call (855) 724-0919 for a free estimate on capping or coating the stack.
Book Your Midtown Chimney Cap & Crown Estimate
If your building’s stack is showing its age, start with an inspection and a written estimate. We’ll document the flue, show you what the crown and cap are actually doing, and tell you plainly what needs doing now and what can wait. Call (855) 724-0919 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bedford-Stuyvesant.