Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Brownsville?
Chimney cleaning in Brownsville typically costs $150 to $290 for a standard sweep on a single-flue wood-burning fireplace, and $210 to $390 when the flue needs more work or the chimney has two flues. That range covers a professional brush-and-vacuum sweep with a visual check of the firebox, damper, smoke chamber, and cap. A Level 2 camera inspection, cap and crown work, or liner restoration adds to the total, and the written estimate you get before work starts is what sets the final price.
We’re Chimney Sweep Bedford-Stuyvesant, and we handle the whole chimney system rather than just the brush. Our technicians have up to 11 years of experience, and we work with professional-grade components from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. If you want to talk through your chimney before booking, call (855) 724-0919. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A standard single-flue sweep in Brownsville runs $150 to $290, most commonly landing near $195.
- Two-flue chimneys and heavier creosote buildup push the sweep to $210 to $390.
- A standalone Level 2 inspection is $175 to $350 and can be booked without any cleaning work.
- Caps and crowns, the most common source of water intrusion, are a dedicated service here, not a bolt-on.
- Wood-burning and gas appliance work is the only thing we do. We don’t do HVAC or dryer vent cleaning.
Chimney Cleaning Cost Breakdown (2026)
Here’s what the line items look like in Brownsville this year. These are typical estimates for a rowhouse or small multifamily chimney, and the written estimate is what actually sets your price.
| Service | Typical Range | What It Covers |
|---|---|---|
| Standard sweep, one flue | $150 – $290 | Brush and vacuum, firebox and damper check, cap look-over |
| Sweep, two flues | $210 – $390 | Same scope, second flue added |
| Heavy creosote removal (glazed or stage 3) | $320 – $650 | Extra time and tooling for hardened deposits |
| Level 2 camera inspection | $175 – $350 | Video scan of the flue interior, documented report |
| Chimney cap supply and install | $180 – $450 | Stainless or copper cap sized to the flue |
| Crown repair or rebuild | $400 – $1,400 | Cracked crown resealed or a new crown formed |
| HeatShield liner resurfacing | $1,400 – $3,200 | Ceramic resurfacing of a deteriorated flue |
| Full stainless reline (DuraFlex) | $2,400 – $5,200 | New liner for a flue that can’t be restored |
| Fireplace repair (damper, firebox, masonry) | $250 – $1,100 | Depends on whether it’s a component swap or masonry work |
What pushes the number up: a second flue, creosote that’s hardened past the fluffy stage, a chimney that hasn’t been touched in many seasons, and any rowhouse configuration where the flue is hard to reach. What keeps it down: a chimney that gets swept regularly, a cap that’s already in good shape, and booking the sweep and the inspection together so the technician is only set up once. We don’t price by the hour and we don’t charge a separate trip fee. The estimate you get in writing is the number.
What Affects Chimney Cleaning Pricing in Brownsville
Brownsville’s housing stock shapes chimney work in ways that don’t show up in a generic price list. Most of the neighborhood is older rowhouse and multifamily construction, and a lot of those chimneys were built for coal or for a different appliance than what’s in the house today. That history matters when we open the cleanout door.
- How long since the last sweep. A chimney swept regularly takes less time than one with years of deposit built up. Stage 3, glazed creosote is hard, shiny, and stubborn, and it’s the single biggest driver of a higher quote.
- Number of flues and appliances. A rowhouse with a wood-burning fireplace and a separate gas insert has two flues with two different service needs. Gas appliances get a different check than wood.
- Access to the roof and the flue. Some Brownsville rowhouse chimneys sit behind parapets or share a party wall, and getting a brush properly through the flue takes longer. We won’t guess at a price over the phone before we see the setup.
- Draft problems and downdrafts. Dense blocks of attached buildings create wind patterns that push air back down a flue. When a sweep turns into a draft investigation, the inspection line item comes into play.
- What the sweep uncovers. A cracked crown, a missing cap, or a damper that no longer seals are all common finds. Cap and crown work is a dedicated service with us, so we quote it as a separate line rather than folding it into the sweep.
- Inspection as a standalone. Plenty of Brownsville homeowners book just the inspection, especially when they’re buying or selling. It’s $175 to $350 on its own, with a documented report you can hand to anyone who asks.
How Much Does a Chimney Inspection Cost in Brownsville?
A Level 2 chimney inspection in Brownsville runs $175 to $350, and it’s a standalone service here, not something bundled into a repair pitch. That means you can book the camera inspection, get the documented report, and decide what to do with it on your own timeline. Real-estate transactions and insurance paperwork are the two most common reasons people book it on its own.
The inspection covers a video scan of the flue interior, the firebox, the damper, the smoke chamber, and the visible exterior of the chimney and crown. You get a written assessment of condition and what, if anything, needs attention. If the sweep and inspection happen on the same visit, the combined total is lower than booking them separately, and the written estimate reflects that. Call (855) 724-0919 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Is It Cheaper to Repair or Replace a Chimney Liner?
Restoring a liner with HeatShield is almost always cheaper than a full reline, and it’s the first option we look at. HeatShield ceramic resurfacing typically runs $1,400 to $3,200 in Brownsville. A full stainless reline using DuraFlex runs $2,400 to $5,200. The gap is real, and most flues that are deteriorated but structurally sound can be restored rather than replaced.
HeatShield isn’t something most sweep-only companies carry. It’s a ceramic resurfacing system that rebuilds the flue’s interior surface from the inside out, extending the life of the existing liner and restoring proper draft. When the flue has failed structurally or the damage is too far along for resurfacing, a stainless liner is the right answer, and we install those too. Get the inspection first. The report tells you which of the two you’re actually looking at, and the written estimate tells you the price.
How to Save on Chimney Cleaning
- Get the free estimate in writing. No fee, no trip charge. Call (855) 724-0919 and describe the chimney, and we’ll give you a range before anyone comes out.
- Book the sweep before the creosote hardens. An annual sweep at $150 to $290 is far less than a heavy creosote removal at $320 to $650.
- Fix the cap before the crown fails. A cap at $180 to $450 protects a crown that costs $400 to $1,400 to rebuild. Water coming down the flue is the most common cause of the expensive jobs we see in Brownsville.
- Bundle the sweep and the inspection on one visit. One setup, one trip, lower combined total than two separate bookings.
- Book inspection-only if you’re buying or selling. You may not need a full sweep on a house that’s about to change hands. The $175 to $350 inspection gives you the documentation without paying for work nobody’s using yet.
- Combine related repairs while the chimney is open. If the sweep finds a bad damper and a cracked crown, doing both in one visit beats two separate mobilizations.
Every job goes through chimney sweep in Bedford-Stuyvesant, and we’ll tell you honestly when a repair isn’t needed yet.
What Does Chimney Cleaning Involve in Brownsville?
A proper sweep is more than a brush on a rope. On a Brownsville rowhouse it usually goes like this: drop cloths go down first, then we work the flue from the top with a rotary brush and a HEPA vacuum running the whole time so no soot ends up in your living room. The firebox, damper, smoke chamber, and the cap on the roof all get checked. If anything looks off, the inspection camera goes down next.
We work with professional-grade components the whole way. DuraFlex stainless liners when a reline is the right call. HeatShield for ceramic resurfacing. Olympia Chimney and Gelco for caps and liners. Famco and Copperfield for cap and crown components. These are the same materials certified chimney specialists use, not the hardware-store substitutes that fail early. One visit, from sweep to structural repair, which means you’re not coordinating a separate mason for a crown crack.
How Often Should a Brownsville Chimney Be Cleaned?
Once a year for a wood-burning fireplace, and once a year for a gas appliance too, though the gas check is lighter. That annual sweep is what keeps the cost at the low end of the range. A chimney that goes several seasons without service is where the price climbs.
How much you burn matters. A household that lights fires a few times a week through the cold months builds creosote faster than one that burns occasionally. If you’ve moved into a Brownsville rowhouse and don’t know the chimney’s history, book the inspection before you burn anything. It’s the cheapest way to find out what you’re dealing with. Call (855) 724-0919 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Can You Clean a Chimney the Same Day?
Same-day service is often available depending on the schedule, and we answer the phone 24/7. That line stays open so you can describe what’s going on and get a real time frame, rather than waiting to find out when someone gets to a message. Dispatch runs 7am to 7pm, Sunday through Friday.
A standard sweep takes roughly an hour to ninety minutes on a single-flue rowhouse, so it’s not a job that eats the whole day. If we find a cap issue or a damper problem while we’re there, we quote it and you decide whether to do it then or later. No pressure to add work on the spot. The estimate is free and the price is set per job.
Why Choose Us for Chimney Cleaning in Brownsville
We do chimney work only: sweep, inspection, cap and crown, chimney repair, and fireplace repair. There’s no HVAC, no dryer vents, no side services. That narrow focus means the person who sweeps your flue is also the one who spots the crown crack and the one who fixes it, with a written estimate in between. One specialist for the whole system.
Inspection is a service you can buy on its own, so the assessment you get is a straight read on your chimney’s condition, not a sales pitch attached to a cleaning. If your flue needs resurfacing, we carry HeatShield. If it needs a new liner, we install DuraFlex. If the crown is failing, that gets quoted and scheduled. Every part of the system, one company.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Brownsville in 2026?
Expect $150 to $290 for a standard single-flue sweep and $210 to $390 for two flues, with most Brownsville jobs landing near $195. Heavy creosote removal pushes it to $320 to $650. Call (855) 724-0919 for an exact quote. Estimates are free.
Is a chimney inspection included in the cleaning price?
Not always, and that’s intentional. A visual check during a sweep is standard, but a full Level 2 camera inspection is a standalone service at $175 to $350. We quote it separately so you’re deciding on it with clear eyes, not paying for it by default. Call (855) 724-0919 to discuss which one your chimney needs.
How much does a chimney cap or crown cost in Brownsville?
A cap runs $180 to $450 installed, and crown repair or rebuild runs $400 to $1,400 depending on whether it’s a reseal or a full rebuild. Water intrusion through a failing cap or crown is the most common expensive problem we find. Call (855) 724-0919 for a free estimate on cap and crown work.
Do you charge extra for same-day chimney service?
No. Same-day service is often available depending on the schedule, and the price is set per job by the written estimate, not by the clock. Call (855) 724-0919 to check the schedule. Estimates are free.
Is it cheaper to repair or replace a chimney liner in Brownsville?
Repair wins in most cases. HeatShield ceramic resurfacing runs $1,400 to $3,200 versus $2,400 to $5,200 for a full DuraFlex reline. The inspection tells you which one your flue actually needs. Call (855) 724-0919 for a free estimate.
Book Chimney Cleaning in Brownsville
Chimney cleaning in Brownsville runs $150 to $290 for a standard single-flue sweep, with two-flue and heavy-creosote jobs going higher. Whether you’re due for an annual sweep, need the inspection report, or want the crown looked at before another wet season, the estimate is free and the price is set in writing before any work starts. Call (855) 724-0919. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
If you’re not sure whether you need a sweep or a full inspection, a quick call sorts it out. Describe the chimney and what you’ve noticed, and we’ll tell you where to start.
Pricing reflects the Brownsville market as of 2026. Chimney Sweep Bedford-Stuyvesant offers free estimates – call (855) 724-0919.
Written by the team at Chimney Sweep Bedford-Stuyvesant.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Marisol Torres"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Aisha Bryant"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Heather Hoffman