Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Crown Heights
If your Crown Heights rowhouse has a cap that’s cracked, missing, or original to a chimney built before 1930, that opening is letting rain, birds, and debris into a flue that may now serve a gas boiler instead of a fireplace. We handle chimney cap and crown work on Crown Heights’ older brick stacks, and we start with a camera inspection so any recommendation is tied to something you can see. Our technicians have up to 11 years of experience. Scheduling a visit to Crown Heights is straightforward: call (855) 724-0919, and fast dispatch runs 7am to 7pm, Sunday through Friday. We’re closed Saturday.

Why Crown Heights Homeowners Call Chimney Sweep Bedford-Stuyvesant for Chimney Cap & Crown
Crown Heights is full of 3- and 4-story brownstones and rowhouses in 11213 and 11225, and a lot of them still wear their original chimney caps, or have lost them entirely. That’s the work we do here most often, and it’s the reason we bring a camera to every cap and crown estimate instead of quoting from the sidewalk.
Local reputation in Crown Heights comes from doing the smaller jobs right. Property managers along the Nostrand and Franklin Avenue corridors call us because we can look at a shared chimney stack serving several units, document what each flue actually needs, and tell them plainly when a crown coating will hold and when the crown needs rebuilding. We’re one company across the full chimney system, so a cap job that turns up spalling mortar doesn’t get handed off to another contractor.
We use professional-grade components from suppliers like Copperfield, DuraFlex, and Olympia Chimney, not hardware-store substitutes. We don’t claim a review count or a rating we can’t verify, and we don’t tell you a cap is failing unless the inspection shows it. Reach us at (855) 724-0919 to book a Crown Heights visit; we answer 24/7.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Crown Heights
These four jobs make up most of what older Crown Heights chimneys need. Each starts with an inspection and a written estimate that sets the final price.
Cap Installation
A proper cap keeps rain, squirrels, and nesting material out of the flue while letting exhaust escape. On Crown Heights brownstones we size the cap to the actual flue tile, which on these buildings is often smaller or more irregular than a modern chimney’s. Many of the original caps here are simply gone, so installation means measuring a stack that’s spent decades open to the weather.
Cap Replacement
Replacing a cap is a common job in Crown Heights because the freeze-thaw cycles we get each winter crack the seams and loosen the fasteners on older galvanized units. A cracked cap still looks like a cap from the street, which is why it gets missed. We document the condition with photos before recommending replacement, and we’ll tell you if a repair will hold instead.
Crown Repair
The crown is the concrete or mortar cap at the very top of the chimney, and on Crown Heights’ pre-war masonry it takes the worst of the weather. Spalling brick and deteriorating mortar joints open gaps that let water travel down into the flue. Crown repair rebuilds that top surface so water sheds away from the stack instead of into it. This is one of the jobs this neighborhood calls us for most.
Crown Coating
When a crown has hairline cracks but is still structurally sound, a flexible coating can seal it and buy years before a rebuild. We use coatings compatible with the older masonry in Crown Heights, where the mortar is often softer than what you’d find on a newer chimney. Our chimney cap & crown team measures how far the cracking has gone before recommending a coating over a rebuild, or the other way around.
Trusted Brands We Service in Crown Heights
Cap and crown work depends on matching the right component to a specific stack, so we install professional-grade parts from brands like Copperfield, DuraFlex, and Olympia Chimney. Those names matter on Crown Heights’ older chimneys because a generic cap that doesn’t fit the flue tile is a leak waiting to start. We source the cap, the crown material, and the liner components from professional suppliers rather than a hardware aisle, and we order per job to match what the inspection shows. Turnaround is quick, and the brand on the box is one that chimney specialists use nationwide. If a project calls for liner restoration, we also work with HeatShield, the ceramic resurfacing system, when the flue liner is rough but still serviceable.

Common Chimney Cap & Crown Problems We See in Crown Heights Homes
Crown Heights’ aging masonry and humid continental climate create a specific set of failures. These are the four we run into most often.
- Missing or damaged original caps on shared stacks. A cap that’s been gone for years lets rain and debris block a flue that no longer serves a fireplace but venting for a boiler. In a brownstone where multiple apartments share one chimney, that blockage can cause draft failures and trip carbon monoxide alarms in several units during the first cold snap.
- Spalling brick and deteriorated crown mortar. Winter freeze-thaw cycles and humid summers break down the surface of older crowns, opening gaps where water penetrates and erodes the flue liner from the inside. A crown that crumbles at the edge is the usual first sign.
- Mismatched flue sizes after a boiler replacement. A lot of Crown Heights heating systems have been swapped from one fuel to another over the years, and the flue doesn’t always match the appliance it now vents. That’s a venting problem, not just a capping one, and it’s exactly why camera inspection matters before anyone quotes relining.
- Shared flues serving several apartments. When a single brick stack carries flues for more than one unit’s heating system, one damaged cap affects the draft on all of them. We inspect each flue in the stack separately and report on them separately.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Crown Heights, NY
Cap and crown pricing in Crown Heights reflects the housing stock: taller rowhouse stacks, multiple flues on one chimney, and masonry that’s been through a century of weather. A typical cap installation in Crown Heights runs $250 to $600, and a custom or multi-flue cap for a shared brownstone stack usually lands between $500 and $1,200. Crown repair on these buildings typically runs $400 to $1,100, while a crown coating is generally $300 to $700 when the surface is still sound. Access and roof height push the number up, and rebuilding a badly spalled crown costs more than sealing a cracked one. We give a flat price in a written estimate before booking, and nothing is recommended without camera evidence you can look at yourself. If the work can safely wait, we’ll say so.
We Also Serve Cities Near Crown Heights
Our chimney cap and crown work extends to the neighborhoods around us. We serve East Flatbush and Williamsburg, and we handle the same cap, crown, and liner work in Prospect Heights and Bedford-Stuyvesant. If you’re just outside Crown Heights, the inspection works the same way: camera first, evidence in hand, written estimate before any work begins. Call (855) 724-0919 to schedule.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Crown Heights
Yes, that pattern is a real sign of a shared flue problem, and it’s common in Crown Heights brownstones where one brick stack carries flues for more than one apartment’s heating system. When the cap on that stack is missing or damaged, rain and debris block the flue and the draft fails, which can back combustion gases into several units at once. A camera inspection of each flue in the stack will show whether a blockage or a damaged liner is the cause. Call (855) 724-0919 to book an inspection. We answer 24/7, and nothing gets recommended that you can’t see on camera.
You often can’t tell from the ground, which is why we get on the roof and look. An original cap on a Crown Heights brownstone is usually a simple flat or domed plate with rusted or missing fasteners, while a replacement tends to be a newer single-piece or multi-flue unit with visible galvanized or stainless hardware. The material and how it’s fastened are the giveaways. A quick inspection answers it for good. Call (855) 724-0919 for an exact quote. Estimates are free.
Camera evidence shows where the water is actually getting in and how far the damage runs. A crown coating is the right call when the cracks are hairline and the crown is still solid underneath; when the camera and photos show spalling brick, open mortar joints, or water already reaching the flue liner, a repair or rebuild is what protects the stack. The difference is visible, and we show you the footage before recommending either. Call (855) 724-0919 to schedule a Crown Heights inspection. The written estimate sets the final price.
It can, yes. When a Crown Heights boiler is replaced, the new appliance may vent differently than the original, and the flue tile it exhausts into was sized for equipment from another era. A cap that’s mismatched to that flue, or missing entirely, lets water and debris into a system the boiler depends on. A camera inspection tells us whether the cap needs to change along with the venting setup. Call (855) 724-0919 and we’ll look at it. Fast dispatch runs 7am to 7pm, Sunday through Friday.
Look at the top edge of the crown from a safe spot at ground level for crumbling mortar, flaking brick, or a visible crack across the surface. In Crown Heights, the humid summers and repeated freeze-thaw cycles break down older crowns faster than newer ones, and a small crack lets water into the flue liner over time. If anything looks off, get it inspected rather than sealed blind. Call (855) 724-0919 for a free estimate; fast dispatch from 7am to 7pm, Sunday through Friday.
Book Chimney Cap & Crown Work in Crown Heights
Older Crown Heights chimneys deserve a real look before anything gets quoted, and that’s what an inspection gives you: camera evidence, photos you keep, and a written estimate that sets the final price. We cover cap installation, cap replacement, crown repair, and crown coating on the brownstones and rowhouses throughout the neighborhood, and we handle every part of the system under one company. Nothing is sold without proof. Call (855) 724-0919 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bedford-Stuyvesant.