Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Bedford-Stuyvesant Homeowners
Most chimneys in Bedford-Stuyvesant are older than the people living in them, and a masonry flue that looks fine from the sidewalk can hide a cracked inner tile, a crumbling mortar joint, or a heavy creosote load that only a camera will find. Our technicians have up to 11 years of experience inspecting chimneys just like the ones you’ll find in these brownstones and townhouses, and we come out with a documented assessment rather than a sales pitch. Whether you’re buying a building, renewing insurance, or just want to know what’s inside your flue, we book a standalone inspection that stands on its own.

We supply and install only professional-grade chimney components from brands like HeatShield, Olympia Chimney, and Famco, so if the inspection turns up something that needs repair, we already have the right materials on hand. Inspection is offered as its own service – you get a full report before a single repair is recommended. Call (855) 724-0919. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Chimney Inspection Service Includes
An inspection is the starting point for everything else on your chimney system. We treat it that way, which means no upsell, no pressure, and no repair talk until we’ve actually seen what’s going on inside the flue.
Level 1 Inspection
A Level 1 inspection is the basic visual check you’d get with an annual sweep, during which we look at the readily accessible parts of your chimney and venting system – the firebox, damper, smoke chamber, and the visible portion of the flue. It’s the right inspection for a chimney that’s in regular use and hasn’t changed since its last check. We perform this as a standalone service in Bedford-Stuyvesant whenever a homeowner wants a quick, honest read on the system’s condition.
Level 2 Inspection
A Level 2 inspection goes further, using video scanning to examine the flue’s interior from top to bottom, along with the attic, crawl space, and any accessible joints or connections. You need this one after a chimney fire, when you’ve changed fuel type or appliance, or when a property changes hands. We run a full camera scan as part of every Level 2 so you can see the flue’s actual condition on screen instead of taking our word for it.
Level 3 Inspection
A Level 3 inspection is the most involved, and it’s only recommended when a Level 2 has already flagged a hidden problem that can’t be assessed without opening up part of the structure. That could mean removing a wall section, pulling back masonry, or accessing an enclosed chase. We don’t suggest a Level 3 casually – it comes with a clear explanation of what we expect to find and why the access is necessary.
Camera Inspection
Camera inspection is what separates guesswork from a real diagnosis. We run a specialized camera down the flue and watch the feed in real time, checking for cracks, gaps in the tile joints, offset flues, and blockages that a visual inspection from the firebox would miss entirely. The footage is documented and shared with you – if we recommend work, you’ll have seen the reason for it yourself.
Flue Inspection
A flue inspection focuses specifically on the passage your smoke and gases travel through, checking for cracked or spalling liner tiles, missing mortar, and the creosote and soot buildup that can restrict flow or feed a chimney fire. Older Bedford-Stuyvesant masonry chimneys often have clay tile liners that have aged past their prime, and the flue is where we find the evidence. We assess the liner’s condition and tell you plainly whether it’s holding up or needs attention.
Real Estate Inspection
When you’re buying or selling a home in Bedford-Stuyvesant, a chimney inspection gives you a documented condition report you can use in the transaction. It covers the same ground as our Level 2 assessment and tells you what the chimney needs before you sign. This is one of the most useful tools a buyer or property manager has, because it changes a vague “chimney is as-is” line into a real picture of what you’re inheriting. We provide the written findings so your attorney or agent has something concrete to work with.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We work with the professional-tier brands that certified chimney specialists across the country rely on. That includes HeatShield, the ceramic resurfacing system used for liner restoration when a full reline isn’t necessary, and Olympia Chimney, whose liners we install and inspect regularly. These aren’t hardware-store substitutes – they’re built for the kind of long-term performance a masonry chimney in Bedford-Stuyvesant needs, and we know exactly where each system tends to fail as it ages.
We also work with Gelco and Famco components, and we service existing installations of these brands when something needs evaluating or replacing. Our familiarity with these products means an inspection tells you more than “it looks OK” – we can identify the specific weak points on the equipment you actually have and give you a realistic timeline for when it will need work. Whether you have HeatShield, Olympia Chimney, or any other make, we can help.

Signs You Need Chimney Inspection Right Now
- Cracks or crumbling visible in the firebox or smoke chamber. Loose brick or crumbling mortar in the firebox can let heat and gases reach parts of the structure that were never meant to handle them. A camera inspection will show whether the damage stops at the surface or has gone deeper into the flue.
- Weakened or missing mortar joints on the exterior. Mortar joints erode over decades, and in older masonry chimneys in Bedford-Stuyvesant that shows up as receding joints and loose bricks. This is a structural concern and a water-intrusion concern rolled into one.
- A smoky draft, or smoke spilling into the room. Smoke rolling back into the room instead of going up the flue usually points to a blockage, an undersized flue, or a compromised flow path. A flue inspection tells you which one it is before the problem gets worse.
- You’ve had a chimney fire, however small. A fire can crack liner tiles and damage the interior in ways that aren’t visible from below. After any chimney fire, a Level 2 inspection is the standard next step – we can scan the whole flue and tell you what survived.
- You’re changing fuel type, appliances, or about to buy or sell. Any change to what the venting system is connected to, or a property transaction, is a trigger for a Level 2 inspection. Getting an independent assessment now saves you from discovering problems after a sale closes or after a new stove is installed.
Our Chimney Inspection Process – Step by Step
- 1
We start with a conversation. Before anyone climbs on the roof, we ask what you’ve noticed – smoke, smells, drafts, recent fires, or a specific concern from a home inspection. That context shapes which inspection level makes sense and where we focus first in Bedford-Stuyvesant.
- 2
We examine what’s easily accessible. The firebox, damper, smoke chamber, and any visible flue sections get a close visual check, along with the appliance connections. We note the condition of every component so the written report is complete, not partial.
- 3
We run the camera down the flue. For Level 2 and flue inspections, our video camera travels the full length of the flue while we watch for cracks, offsets, gaps in tile joints, and blockages. This is where a lot of the real discoveries happen, and it’s where our findings become something you can see rather than something you have to trust.
- 4
We check the roof-side elements. Cap, crown, flashing, and masonry condition at the top of the chimney are part of the inspection, because water entering at the crown or cap is one of the most common long-term failure points we see. If the cap or crown is failing, we’ll tell you now rather than after it causes water damage inside.
- 5
We walk you through the findings. When we’re done, we review what we found, show you the camera footage and photos, and put our recommendations in writing – with a clear note on what’s urgent and what can safely wait. The inspection is the deliverable; the repair conversation only follows if the evidence calls for it.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Bedford-Stuyvesant?
A typical Level 1 inspection in Bedford-Stuyvesant runs $95 to $175, and a Level 2 with camera scan generally falls in the $175 to $350 range, depending on the number of flues, roof access, and whether anything unexpected turns up. Pricing is per job, and the written estimate sets the final price – nothing is added after the fact.
| Inspection type | Typical estimated range |
|---|---|
| Level 1 visual inspection | $95 – $175 |
| Level 2 with camera scan | $175 – $350 |
| Camera/flue inspection add-on | $75 – $150 |
| Real estate inspection report | $200 – $375 |
| Level 3 (if required) | Quoted per job after the Level 2 findings |
Factors that move the number: multiple flues, difficult roof access on a tall brownstone, a heavy creosote load that needs clearing before the camera can pass, and whether a written report is needed for a lender or attorney. The way to avoid overpaying is simple – get the inspection first and the repair recommendation second. An independent inspection gives you the diagnosis before anyone quotes you a fix, and if the chimney only needs a sweep, that’s what we’ll tell you. The estimate is free, and the written numbers are what stand.
Chimney Inspection Near Bedford-Stuyvesant – Our Service Area
We serve Bedford-Stuyvesant and the surrounding neighborhoods, including Prospect Heights, Clinton Hill, Williamsburg, Bushwick, and Carroll Gardens, along with points across Manhattan and Brooklyn. Response timing depends on where you are and the day’s route – call and we’ll book you into the next available opening. If you’re nearby, our chimney inspection page has the local details, and for full sweep-and-inspection service, start with chimney sweep in Bedford-Stuyvesant.
Serving Bedford-Stuyvesant, NY – Our Local Coverage Area
We serve Bedford-Stuyvesant and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Bedford-Stuyvesant
A chimney inspection is a structured assessment of your chimney and venting system’s condition, covering the firebox, flue, damper, and roof-side components. It comes in three levels – Level 1 visual, Level 2 with video scan, and Level 3 with structural access – and the right level depends on your situation and history. We perform it as a standalone service, so you get the findings before any repair is discussed. Call (855) 724-0919 for a free estimate – we’ll tell you which level fits.
A Level 1 inspection usually takes about 30 to 45 minutes, while a Level 2 with camera scanning runs closer to 60 to 90 minutes depending on the number of flues and roof access. We don’t rush through a flue scan, because the time we save isn’t worth missing a cracked tile. You’ll have the report and findings reviewed with you before we leave.
Typical estimated costs range from $95 to $175 for a Level 1 inspection and $175 to $350 for a Level 2 with camera scan, depending on flue count and access. A real estate report usually falls around $200 to $375. The written estimate sets the final price, and the on-site estimate is free. Call (855) 724-0919 for an exact quote.
Yes. We inspect HeatShield ceramic liner installations, Olympia Chimney liners, and Gelco and Famco components, and we know where each system tends to wear as it ages. If you have a liner you’re unsure about, a camera inspection will show its actual condition rather than a guess. We service these brands and can advise on repair or replacement when the evidence calls for it.
Same-day inspections are often possible, depending on the day’s schedule and where the property sits in Bedford-Stuyvesant. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday – we’re closed on Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We stand behind the inspection findings and the written report, and any repair work we recommend follows the manufacturer’s warranty on the components we install. Because we supply professional-grade brands like HeatShield and Famco, the products carry their own coverage. We’ll explain exactly what’s covered when we review the report with you.
Clear the area around the fireplace, remove any ashes, and make sure we can access the firebox, damper, and any attic or crawl space entry. If you have previous inspection reports or know when the chimney was last swept, have those handy. That’s it – you don’t need to do anything to the flue, and the rest is our job once we’re there in Bedford-Stuyvesant.
Schedule Your Chimney Inspection Service in Bedford-Stuyvesant Today
Knowing what’s inside your flue beats guessing, and a documented inspection is the starting point for every other decision about your chimney. We handle the full system – inspection, sweep, cap and crown, repair, and fireplace work – using professional-grade components from recognized suppliers. Call (855) 724-0919. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation.
Written by the team at Chimney Sweep Bedford-Stuyvesant.