Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Bedford-Stuyvesant Homeowners
Water is the quiet destroyer of masonry chimneys in Bedford-Stuyvesant. It gets in at the top, where the cap and crown meet the flue, and then it works its way down through brick, mortar, and the ceiling below. A missing or cracked cap and a crown that has spalled are the two most common entry points we find, and they’re the reason cap and crown work is a dedicated service for us rather than something tacked onto a sweep.

Our technicians have up to 11 years of experience across the full chimney system, and we supply only professional-grade components from brands like Copperfield, Gelco, and Olympia Chimney. We start with an inspection so you know what the flue actually needs before anyone recommends a repair. Call (855) 724-0919 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
What Our Chimney Cap & Crown Service Includes
Caps and crowns are separate parts of the same defense, and treating them together is how you stop water at the top of the chimney. Here’s what each part of the service covers.
Cap Installation
A chimney cap is the fitted cover that sits over the flue opening, with mesh sides that let smoke out while keeping rain, birds, and squirrels from getting in. If your flue is open to the sky right now, a cap is the single most cost-effective thing you can add. We measure the flue, supply a cap sized to it from a professional-tier line, and secure it so it holds against wind without blocking the draft.
Cap Replacement
Caps rust, warp, or lose their mesh over time, and a damaged cap is worse than none because it can shed pieces down the flue. We replace caps that have rusted through, come loose, or no longer fit the flue after a liner change. We match the new cap to the flue size and the appliance, then check the draft after installation so the fireplace still pulls properly.
Crown Repair
The crown is the mortar cap at the very top of the masonry that sheds water away from the brick below. When it cracks, water runs into the chimney wall instead of off it. We repair crowns with proper bonding and a slope that directs water away from the flue, and we rebuild sections where the mortar has failed entirely rather than smearing a patch over the damage.
Crown Coating
Crown coating is a protective layer applied over a sound crown to keep hairline cracks from growing into real ones. It’s the right call when the crown is intact but showing early surface checking. We prep the surface, apply a flexible coating from a recognized supplier, and leave the crown draining the way it should.
Multi-Flue Cap
Older Bedford-Stuyvesant rowhouses often have two or three flues side by side, and fitting each with its own cap can look cluttered and leak between them. A multi-flue cap covers the whole stack in one unit while giving each flue its own vented opening. We build these to the actual dimensions of your chimney top so the fit is right and the water runs off the edges.
Custom Cap
When a chimney has an unusual size, a shaped crown, or a flue arrangement that standard caps don’t fit, a custom cap is fabricated to the measurements we take on site. We supply custom units in materials suited to the chimney’s style and the building’s look. It’s the option that gets a proper seal on a chimney that has been fighting off-the-shelf parts for years.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We work with professional-tier chimney components, and we know where each line tends to wear. Olympia Chimney caps and multi-flue units are a regular sight on the rowhouse stacks around here, and we’ve learned which of their fasteners and seams give out first after years of freeze-thaw. Famco components show up on a lot of older installations, and we know how their caps sit and what to check when one starts to shift.
Gelco crown materials are one of the products we trust for crown work because they handle the movement a masonry crown sees through the seasons. HeatShield isn’t a cap or crown product, but we use it when a cap or crown repair uncovers flue damage during the same visit, which saves you a second appointment. Whether you have Olympia Chimney, Famco, or any other make, we can help.
Signs You Need Chimney Cap & Crown Right Now
- Water staining on the ceiling or chimney breast. Brown rings or damp patches near the chimney usually mean water is getting in at the crown or cap. The longer it runs, the deeper it soaks into the masonry, and the repair gets bigger.
- Crumbling mortar at the top of the chimney. If you can see flaking or loose mortar on the crown from the street or the roof line, the crown has started to fail. That’s the moment to repair it, before the brick underneath starts spalling too.
- A missing, loose, or rusted cap. A cap that’s gone or rattling in the wind is letting rain straight down the flue. It also leaves the flue open to birds and squirrels, which nest in the smoke chamber and block the draft.
- Rust or corrosion on the damper or firebox. Rust inside the firebox often traces back to water coming down an uncapped flue. It’s a sign the top of the chimney needs attention even if the firebox itself looks fine.
- Pieces of mortar or debris in the firebox. Falling mortar from a failing crown can drop into the flue. It’s a safety concern as well as a sign of structural wear, so have it looked at before the next fire.
Our Chimney Cap & Crown Process – Step by Step
- 1
Inspection first. We start with a standalone inspection of the cap, crown, flue, and firebox, using a camera where the flue needs a closer look. You get a documented assessment before any repair is recommended, so you’re deciding on evidence rather than a sales pitch.
- 2
Written findings and a flat-price quote. We walk you through what we found, show you the photos, and give you a written estimate for the work. The price is set per job by that estimate, and you agree to it before anything is booked.
- 3
Prep and protection. On the day of the work, we protect the roof and the areas below, then remove the old cap or the failed crown material. We don’t coat over damage; we get down to sound masonry first.
- 4
Installation or repair. We install the new cap or multi-flue unit, or rebuild and coat the crown, using professional-grade materials from recognized suppliers. The fit is measured to your chimney, not guessed at.
- 5
Final check and photo report. We check the draft, confirm the cap is secure, and photograph the finished work so you can see exactly what was done. The report is yours to keep, which helps for insurance or a future sale.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Bedford-Stuyvesant?
A typical cap installation in Bedford-Stuyvesant runs $180 – $450 depending on flue size and the style of cap. Crown repair generally runs $350 – $900, with crown coating at the lower end and a full crown rebuild at the higher end. A multi-flue or custom cap usually lands between $500 and $1,200, since the unit is built to your chimney’s dimensions.

What moves the price: the number of flues on the stack, whether the crown needs a patch or a rebuild, the height and access of the chimney, and the material you choose for the cap. A taller rowhouse stack takes more setup, and a shaped or oversized crown takes more fabrication. To avoid overpaying, get the inspection first and ask for photos of what’s actually failing. Nothing should be recommended without camera evidence you can see for yourself, and we’ll tell you plainly when a crown can safely wait another season.
Every free estimate includes the inspection findings, photos, and a written flat price for the agreed scope. The written estimate sets the final price. Call (855) 724-0919 for an exact quote.
Chimney Cap & Crown Near Bedford-Stuyvesant – Our Service Area
We serve Bedford-Stuyvesant and the neighborhoods around it, including Prospect Heights, Clinton Hill, Williamsburg, and Bushwick. If you’re nearby and want the same service, see our chimney cap & crown page for Prospect Heights, or our chimney cap & crown page for Clinton Hill. For the full range of work we do, start with chimney sweep Bedford-Stuyvesant, where you can see how a chimney cap & crown fits into the complete system. We also cover Carroll Gardens, the Lower East Side, Marine Park, Mill Basin, Gramercy, Kips Bay, and Midtown.
Serving Bedford-Stuyvesant, NY – Our Local Coverage Area
We serve Bedford-Stuyvesant and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Bedford-Stuyvesant
A chimney cap covers the flue opening to keep rain and animals out, while the crown is the mortar top of the masonry that sheds water away from the brick. You need both because they protect different parts of the chimney: the cap guards the flue, and the crown guards the structure. If either one fails, water finds a way in. Call (855) 724-0919 if you’re not sure which one is the problem.
Most single-flue cap installations take about an hour, and a crown coating is often done in half a day. A crown rebuild or a custom multi-flue cap can take longer, depending on the stack and the curing time for the material. We give you a realistic time window with the written estimate before we book the work.
Caps typically run $180 – $450, crown repairs $350 – $900, and multi-flue or custom caps $500 – $1,200, with the written estimate setting the final price. The number depends on flue count, access, and whether the crown is coated or rebuilt. Nothing is recommended without inspection evidence you can see yourself. Call (855) 724-0919 for an exact quote – estimates are free.
Yes. We service Olympia Chimney and Famco installations, and we know how their caps and fasteners wear over time. If your existing cap is from another maker, we can still assess and replace it. We supply professional-grade components and won’t swap in a generic hardware-store part.
We can often handle cap and crown work the same day once the inspection is done. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed on Saturday, so a call that comes in then is booked into the next opening. There’s no premium for a same-day visit; the written estimate sets the price.
Our work is backed by a satisfaction guarantee, and the materials we install carry the manufacturer’s warranty from the supplier. We show you the photos of the finished job so you know exactly what was installed. If something isn’t right after the work, call us and we’ll make it right.
Clear access to the fireplace and the area around the chimney helps, and let us know if you have pets or anything fragile near the hearth. You don’t need to do anything to the roof or the chimney itself. Our technicians handle the setup and protection on the day.
Schedule Your Chimney Cap & Crown Service in Bedford-Stuyvesant Today
Water at the top of your chimney won’t fix itself, and a cap or crown caught early is a small job. Call (855) 724-0919 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Start with an inspection, see the evidence, and decide from there.
Written by the team at Chimney Sweep Bedford-Stuyvesant.