Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Bedford-Stuyvesant?
Chimney cap and crown work in Bedford-Stuyvesant typically runs $325 to $1,150 for a single chimney, with most jobs landing between $475 and $775. A straightforward replacement cap alone usually costs $185 to $450 installed, while crown repair or rebuilding runs $400 to $1,100 depending on how much masonry has to come out. If you need both a new cap and a crown rebuild, budget in the higher end of that range.
Those ranges reflect what we see across Bedford-Stuyvesant’s brownstones, row houses and older masonry chimneys, where parapet walls, shared party walls and tight roof access all shape the final number. We give written estimates free, and the estimate sets the price. Call (855) 724-0919. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the work usually breaks down for a Bedford-Stuyvesant property. Prices are typical estimates for the local market and the written estimate is what you’ll actually pay.
| Line item | Typical price range |
|---|---|
| Standard single-flue cap (Famco or Olympia style) | $185 – $320 |
| Multi-flue cap for a shared or oversized stack | $320 – $450 |
| Custom stainless or copper cap (Copperfield) | $400 – $700 |
| Crown repair (crack sealing, patching with CrownCoat or Gelco sealant) | $400 – $650 |
| Crown rebuild (removing and re-pouring a masonry crown) | $650 – $1,100 |
| Crown rebuild with chimney flashing tie-in | $900 – $1,400 |
| Cap and crown packaged together | $475 – $1,400 |
| Standalone chimney inspection (if you want to know first) | $150 – $300 |
What stretches the number upward? Multi-flue stacks on a shared party-wall chimney, custom copper caps where the visual finish matters, a crown that’s spalling so badly it needs a full rebuild rather than a seal, and any flashing work that has to be tied back into the roof. What keeps it lower? A single-flue cap on an accessible parapet, a crown with one hairline crack that still has sound masonry under it, and calling before the water damage reaches the flue tile. We supply and install only professional-grade components from brands like DuraFlex, Copperfield, and Olympia Chimney, and the same people who inspect the chimney handle the cap and crown – so nothing gets handed to a subcontractor halfway through.
What Affects Chimney Cap & Crown Pricing in Bedford-Stuyvesant
- Access and roof geometry. Bedford-Stuyvesant’s brownstones and row houses sit shoulder to shoulder, and getting to the top of the stack often means working from a parapet wall or from a bulkhead roof. The extra setup time and fall protection are part of the price, not an afterthought.
- Number of flues. A townhouse with one flue and a gas insert is a small job. A shared stack serving two or three flues needs a wider cap, more masonry work, and sometimes a party-wall conversation – all of which pushes the price toward the top of the range.
- Crown condition. A crown with surface cracking can usually be sealed. A crown that’s spalling in chunks, or where the mortar bed has separated from the flue tile, has to come out and be re-poured. That’s the single biggest swing in the estimate.
- Material choice. A galvanized single-flue cap costs less than a stainless cap, and a custom copper cap sits at the top. Here in Bedford-Stuyvesant, the choice is usually about how visible the chimney is from the street and how long the owner wants the cap to last – stainless and copper hold up against freeze-thaw and wind far better than light-gauge galvanized.
- Freeze-thaw damage. New York’s winters cycle masonry through repeated freezing and thawing, and the crown is the first place that shows it. Spalling and hairline cracks at the top of the chimney are the usual entry point for water, and the more years a crown has gone unsealed, the more masonry has to come out.
- Whether you start with an inspection. An inspection is a standalone service for us. That means you get a documented assessment of the whole chimney – flue tiles, crown, flashing, cap – before anyone recommends repair work, and you can use that report for a real-estate transaction or an insurer if you need to.
How to Save on Chimney Cap & Crown
The biggest savings come from timing. A crown sealed while the crack is hairline costs a fraction of a rebuild. Once water gets behind the crown and the mortar bed starts separating, the work moves from sealing to masonry – and that’s where Bedford-Stuyvesant homeowners see the jump from a few hundred dollars to four figures.
- Deal with the crown before the cap. If the crown is failing, replacing the cap on top of a bad crown just traps the problem underneath. Fix the crown first, then cap it.
- Combine the visit. Since we handle the cap, crown, flue liner and fireplace in the same service, having everything evaluated in one visit means one dispatch and no overlapping estimates from separate contractors.
- Choose the right cap for the flue, not the most expensive one. A stainless single-flue cap on a gas insert chimney is a sensible spend. A custom copper cap makes sense where the chimney is a visible architectural feature from the street.
- Ask for the written estimate, not a phone number. Estimates are free, and the written estimate sets the final price – so there’s no surprise line item when the work is finished.
- Look at the top of the chimney from the ground first. If you can see crumbling masonry or a missing cap, that’s the signal to book an inspection rather than wait. Call (855) 724-0919 for a free estimate.
Why the Crown Matters More Than Most Homeowners Realize
The crown is a sloped concrete or mortar cap at the very top of the chimney, designed to shed water away from the flue opening. When it cracks, water runs down the inside of the chimney, soaks into the surrounding masonry, and works its way toward the flue liner. In a Bedford-Stuyvesant brownstone, that water often shows up as damp staining on an interior wall or a musty smell in a room that has a fireplace, long before anyone thinks to look at the roof.
The cap sits on top of the crown and keeps rain, birds and debris out of the flue. A chimney without a cap is a chimney with an open hole in it. The pairing is simple: the crown protects the masonry, the cap protects the flue. Neither is expensive relative to what water damage costs once it reaches the liner.
If you’re not sure what shape yours is in, start with an inspection. We offer inspection as a standalone service, which means you get a documented assessment of the whole system before any repair is recommended. If the cap is simply missing or bent, that’s a straightforward fix. If the crown has gone, the inspection tells you exactly what’s needed and the estimate gives you the price in writing. One company covers inspection, cleaning, chimney cap & crown work, chimney repair, and fireplace repair – so anything found during a visit can be handled by the same specialist.
Can You Fix a Crown Without Rebuilding It?
Sometimes yes. A crown with shallow cracking and sound masonry underneath can often be sealed with a flexible crown coating, which bridges the crack and keeps water out. A crown that has lost chunks of material, or where the mortar bed has pulled away from the flue tile, needs to be rebuilt – patching over a failing crown just delays the problem.
We use Gelco crown sealant and CrownCoat where the masonry is sound, and rebuild where it isn’t. The inspection tells you which one applies. Either way, the goal is the same: built to last, not patched to pass.
Same-Day Repair and What Happens When You Call
Same-day service is often available for a cap and crown estimate in Bedford-Stuyvesant. When you call, we ask about the chimney, the fireplace or insert, and any water staining you’ve noticed indoors. From there we book a visit, and our technicians have up to 11 years of experience assessing this kind of masonry.
If you have a chimney leak and you’re not sure where it’s coming from, a cap and crown assessment is usually the right first step. Water intrusion at the top of the chimney is the most common source, and it’s also the easiest to rule out or confirm. Call (855) 724-0919. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
If you’d like a broader look at your chimney system, the chimney sweep in Bedford-Stuyvesant page covers the inspection and cleaning side; this page covers the structural work at the top.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Bedford-Stuyvesant?
A chimney cap in Bedford-Stuyvesant typically costs $185 to $450 installed, depending on whether it’s a single-flue cap, a multi-flue cap, or a custom copper or stainless cap. Call (855) 724-0919 for an exact quote – estimates are free.
How much does chimney crown repair cost in Bedford-Stuyvesant?
Crown repair in Bedford-Stuyvesant usually costs $400 to $650 for sealing and patching, and $650 to $1,100 for a full crown rebuild. The difference comes down to how much masonry has to come out once the failed section is opened up.
Is it cheaper to repair or replace a chimney crown?
Repair is almost always cheaper – $400 to $650 versus $650 to $1,100 for a rebuild – but only when the masonry underneath is still sound. A crown that’s spalling or has separated from the flue tile can’t be sealed successfully, and a rebuild is the cheaper option over time. Call (855) 724-0919 for a free assessment.
Can you come today?
Same-day service is often available in Bedford-Stuyvesant. Call (855) 724-0919 and we’ll book you into the earliest opening. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
Do I need a cap if I already have a crown?
Yes. The crown sheds water away from the chimney top; the cap keeps rain, birds and debris out of the flue opening. A crown without a cap leaves the flue open to weather. Most Bedford-Stuyvesant jobs that add a cap add it to a chimney that already has a crown, and both together typically run $475 to $1,150.
How long does a chimney cap and crown job take?
A cap install is usually completed in a single visit. Crown repair of a few hours is common, and a full crown rebuild can run into a second visit depending on access and curing time. The written estimate covers the scope before any work starts.
Get a Free Estimate on Cap and Crown Work in Bedford-Stuyvesant
If your crown has cracks, your cap is missing or bent, or you’re not sure what the top of your chimney looks like, the cheapest move is to find out. Estimates are free, the written estimate sets the price, and the inspection is a standalone service if that’s all you need right now. Call (855) 724-0919. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bedford-Stuyvesant.
Pricing reflects the Bedford-Stuyvesant market as of 2026. Chimney Sweep Bedford-Stuyvesant offers free estimates – call (855) 724-0919.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Marisol Torres"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Aisha Bryant"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Heather Hoffman